This guide shows you how to set up your Wired HD IP Bird Box Camera on a Windows PC or Apple Mac computer. Make sure your computer is connected to the same internet network that you're going to connect the camera to. Wire up the camera and connect it
This guide shows you how to set up your 2nd Gen Wired HD IP Bird Box Camera (picture below) so that you can watch wildlife footage on your phone or tablet whether you're at home or on the go. If you are unsure of which camera you have, please have a
By default the Wired HD IP Bird Box Camera doesn't have a password and can be left blank. However, if you set a password and have forgotten it or you accidentally locked your camera, you will need to follow these steps to reset it. To reset the passw
In this guide, we will show you how to connect your HD IP bird box camera to iSpy, how to set it up to record onto your Windows PC, and how to set up a recording schedule and motion detection. You will need a HD IP bird box camera, a windows PC and t
To attempt to get this problem resolved we will need to try adding the camera to a pc/mac, the below guide goes through the steps on how to do this. https://help.green-feathers.co.uk/support/solutions/articles/43000440457-1st-2nd-gen-wired-ip-camera-
This guide is designed to assist with updating the IP address of your wired bird box camera, this may be required if you have a new camera that is detected on the phone app but will not load an image or where you have changed internet providers. To s
This guide will show you how to wire up your 2nd Gen IP Network Bird Camera (NCIP2) pictured below. If you are unsure of which camera you have, please have a look here. First, empty out the bag that contains the parts for the waterproof connector. Yo