Wireless Analogue Bird Box Camera - changing the channelUpdated 10 months ago
This guide show you how to change the wireless channel on your Wireless Analogue Bird Box Camera. This is the best way to clear up any interference and get the clearest image.
1. Locate the foam rubber bung in the back of the camera.
2. Remove the bung to expose the 2 small channel switches.
3. Use an opened paper clip, pin or similar to flick the switches either left or right. The different combinations and the channel this sets the camera to are as follows:
Important: remember to change the receiver channel to match that on the camera. This is done by simply moving the switch on the side of the unit to the corresponding channel.
Need more help?
If you need help with anything else please check out our other guides or get in contact.